Atmel Board 4.5 has no SF erase option and no support for serial eeproms and Microchip PIC's.
You can choose between 5 different Vcc voltages, this depends on the chip you are using, check a datasheet if in doubt.
For LV(low voltage)chips 3.3 will be ok.
4-way dipswitch setting: 1 ON 2.7, 2 ON 3.0, 3 ON 3.3, 4 ON 5.0, all OFF 6.0 volt.
Vcc voltages can be modified easy with different resistor values.

The tsop 48 supports 29F(LV)and 28F tsop 48 chips and compatibles.
(like the AT49LVXXXX or 58FVBXXX)that can be programmed in BYTE mode.

Put the chip in the ZIF from above. push both load buttons together, the chip will be centered.
Release both buttons together, the contact strips should get on the chip pins(lay on the horizontal ends)
Use a magnifying-glass to check when needed.

Send to friend

Your name: * Your email: * Recipient's email: *   Send to friend

Customers who bought this product also bought

Lime Green Wax Resin Ribbon For Zebra Card Printers-Non Pvc Cards & Cardboard Evolis-Matica Plus Ribbon YMCKO Quality colour ribbon MPN R3011 Motorola Symbol DS6707/6708 Scanner Evolis Optoseal Hologram 350 Images Manufacturer P/N:R4001 Green Wax Resin Ribbon For Zebra Card Printers-Non Pvc Cards & Cardboard RF Card Lock Max-6600-76 Light Green Gold Colour Shifting Blank PVC Laminated Cr80 30mil Cards Evolis or Matica BLACK Mono Ribbon 1000 images MPN R2011 Funcard 4 Smartcard Zebra P100i Single Feed Colour Printer

Customer feedback

Product rating Customer Reviews There have been no reviews for this product. Add your review here Your name: * Your message: * Maximum review length is 2000 characters Type the characters you see in the picture:   Add review