Home  
  Entertainment  
  Mobile  
  Studiomaster  
  Card Printing  
  EPOS  
  Cards & Cams  
  Gemalto  
  Programmers  
  Misc Products  
  Maxlocks  
  Receivers  
 
 
Home Shopping Cart Contact Us
 
top banner
Maxking :: Receivers :: Blade Receivers :: Blade Media BM500-s is a low-cost Satellite Receiver based on the open architecture of the Linux Operating System.
 
Special Offer ...
  Card printers  
  Programmers  
  Locks  
  Epos  
  Printers  
 

Blade Media BM500-s is a low-cost Satellite Receiver based on the open architecture of the Linux Operating System.
Blade Media BM500-s is a low-cost Satellite Receiver based on the open architecture of the Linux Operating System.

Blade Media BM500-s is a low-cost Satellite Receiver based on the open architecture of the Linux Operating System.
The Blade Media BM 500S is the smallest Linux satellite TV receiver, with 1 x Smartcard-Reader.

1. 250 MHz IBM PowerPC Processor (350 Mips)
2. 2 LED status
3. Linux Operating System
4. Full automatic service scan
5. Supports directly bouquet-lists (indirect unlimited)
6. Supports multiple LNB-Switching control (supports DiSEqC)
7. 1 x Smartcard-Reader
8. Unlimited channel lists for TV/Radio
9. SPDI/F nterface for digital bit stream out (AC-3 / DTS)
10. MPEG2 Hardware decoding
11. Channel-change time < 1 second
12. Fully adaptable OSD in many languages (skin-support)
13. 100Mbit full duplex Ethernet Interface
14. Supports EPG (electronic program guide)
15. 1 x Scart-interfaces (fully controlled by software)
MPN Max17032
Quantity in stock 75 item(s) available
Weight 1.20 kgs
Max Code xx
Maxking price: £80.68 (89.79)
Price including VAT
Options
Quantity (75 available)
*Note: Price including VAT
  Cart is empty

Features | Specifications | Downloads | Order Codes

S5000HD

Introduction

Blade Media BM500-s is a low-cost Satellite Receiver based on the open architecture of the Linux Operating System.


Technical Features

button
250 MHz IBM PowerPC Processor (350 Mips) button

Ethernet:

100 MBit compatible, bi-direktional interface
Function Update of Firmware and Preprogramming

button
-2 LED status button

LNB Power and polarisation:

LNB Current 500mA max. ; short-circuit-proof
LNB Voltage vertical < 14V without load, > 11,5V at 400mA
LNB Voltage horizontal < 20V without load, > 17,3V at 400mA
LNB shut-off at Standby-Mode

button
- Linux Operating System button

Count of active satellite positions:

DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control

button
- Full automatic service scan button

Output digital:

Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical (AC3)

button
- Supports bouquet-lists button

Output analog:

Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB

button
- Supports multiple LNB-Switching control (supports DiSEqC) button

Seriel Interface RS 232:

Type RS232 bi-directional
Bit rate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function Update of Firmware and Preprogramming

button
- 1 x Smartcard-Reader button

Power consumption:

< 10W / 12V

button
- Unlimited channel lists for TV/Radio button

Input voltage:

DC12V,alternating acurrent +/- 15%

button
- SPDI/F Interface for digital bit stream out (AC-3 / DTS) button

External power supply:

Input:
110-240V AC / 50-60Hz / 0,6A
Output:
12V = / 1A

button
- MPEG2 Hardware decoding button

Others:

Ambient Temperature +15C...+35C
Humidity < 80%

button
- Channel-change time < 1 second - Fully adaptable button

Video decoder:

Video Compression MPEG-2 and MPEG-1 compatible
Video Standard PAL and NTSC
Video Formats 4:3 / 16:9
Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)

button
-OSD in many languages (skin-support) button

Letterbox precolating for 4:3 TV-Device Audio decoder:

Audio Compression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

button
- 100Mbit full duplex Ethernet Interface button

Video parameter:

Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter conforms with ETS 300 472 Standard

button
- Supports EPG (electronic program guide) button

TV-Scart:

Output: FBAS,RGB,S-VHS over OSD selectable

button

1 x Scart-interface (fully controlled by software)

 

   
button

DBS-Tuner:

Frequency Range 950 .. 2150 MHz
Signal Level - 65 dBm .. - 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK
Input Symbol rate 2 .. 45 Mbaud/s, SCPC / MCPC
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
Roll-off Factor 35 %
Demultiplexing according ISO 13818-1

   

Options

button
See Available Accessories

Technical Specifications

button
DBS-Tuner mit DVB-S2:
requency Range 950 . 2150 MHz
Signal Level - 65 dBm . - 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8
Roll-off Factor 35 %
Demultiplexing according ISO 13818-1
button
Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible
Video Standard PAL G/ 25 Hz
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device
button
Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
button
Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB
button
Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical (AC3)
button
Ausgang Video:
Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm
button
Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard
button
TV-Scart:
Output: FBAS, RGB, S-Video
button
Serielle Interface RS 232:

Typ RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware

button
Ethernet:
10/100 MBit compatible interface
Function: Update of Firmware
button
Analoge modem:
analoge modem for Internet connection
button
SATA Interface:
- for use either as internal HDD 2,5 or eSATAor internal 2,5" HDD
button
USB
2 x USB 2.0 Host
button
LNB power and polarisation per tuner:
LNB Current 500mA max. ; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
LNB shut-off at Standby-Mode
button
Count of active satellite position:
DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control)
button
Power consumption:
< 15W at 12V
button
External PSU
Input:
110-240V AC / 50-60Hz / 0,6A
Output:
12V = / 3,0A
button
Physical specification:
Ambient Temperature +15C...+35C
Humidity < 80%
Size (W x D x H): 195 mm x 130 mm x 40 mm
Weight: 0,6 kg

Downloads

 

Name File Type File Size

Firmware
(Release 2.8.2 from 20.05.2010)

pdf
1.040kb
User manual
(PDF - English)
pdf
 
DreamUP V1.3.3.6
for all models
   
HowTo - Dream Verification System
How to use the Dream Verification System (PDF)
pdf
 
   

Order Codes

Manufacturer Code
Warranty
   
   
   
   
   
Available Accessories
 
 
 
 
 
 
 
 
 

Send to friend
: *
: *
: *
 

Customer feedback

Product rating

Customer Reviews

  • Author: Garry D
    I bought it here, but i'm little bit angry bacause today i found it cheaper here: http://topamshop.com

Add your review here

: *
: *
Maximum review length is 2000 characters
Type the characters you see in the picture: